stardestroyer001

Actually, upon reading my guide I linked again, I remembered that the scoring of that glue along the warp field grille was fruitless, the nacelle came apart along the opposite seam anyway. What was important was getting the front end apart, and getting a pointed tool like an awl into the little gap at the narrow point of the warp field grille's fan-out bit behind the bussard assembly.

 

There's a colour coded diagram in that link I mentioned the other day... I can see the pictures, but they're potentially down for everyone else - so let me know if they're not showing for you.

 

Again, best of luck!

I'll be sure to try that, thanks!

That's horizontally, along the length of the nacelle? Or vertically at the wide end? (I did the latter, the nacelle is still sealed tighter than an airlock!)

And thanks, I'll have another look.

Good to see you again!

About cracking open the nacelles, how exactly did you do it? I tried slipping different objects under the white bussard caps, but that resulted in bending the plastic.

I recently bought the AA/DST Enterprise-E and would like to replace the lighting with LEDs as well as lighting up the impulse and nacelle engines. Was there ever a tutorial for doing this? Can someone please direct me to any links that could help me on this project? Thanks in advance.

(Side note: Not sure if there's a rule against necroing. If so, I apologize in advance.)

http://imgur.com/a/YlAqm/

Someone redid their Ent-E with better lighting. Granted, their Ent-E was the second release, so all they had to do was replace the existing lights with LEDs. But there's a start.

I know the head programmer on the Excalibur project, if anyone can see it through, he can.

I can't wait until Excalibur comes out. Once it does, goodbye STO.