Custom DST Captain Janeway
#21
Posted 20 January 2010 - 05:14 PM
#22
Posted 21 January 2010 - 02:16 AM
SS
#23
Posted 21 January 2010 - 07:47 AM
#24
Posted 21 January 2010 - 03:29 PM
So that would be "The" Dr., Tom, Harry, Tuvok, & Chakotay!
Then you just need to figure out what to do about Tores and hopefully that 7 of 9 might get released some day!
#25
Posted 21 January 2010 - 05:48 PM
#26
Posted 21 January 2010 - 06:04 PM
Those new pics look a lot better JMW. She looks much better without the eyeliner & the hair sits very well now.
I'm trying to think what heads would be best for characters. Roxanne Dawson had very high cheek bones...maybe Crusher or Troi's head.
Not sure if Picard's head could be altered enough to make him look like Robert Picardo.
You could maybe whip up a Neelix using AGT Geordi's body.
#27
Posted 22 January 2010 - 01:28 AM
Is that a "Generations" Movie Data I see in the back ground?!
I was thinking of doing the same thing to add to my Genertations Riker Head swap (like yours).
I was also thinking of adding a Picard and Geordi to that roll call...
Generations had an odd mix of uniforms on the cast... some had the old TNG style and others had the VOY style. I think in Generations it was just Riker, Picard, Data & Geordi...
#28
Posted 22 January 2010 - 07:41 AM
I have a list of the characters heights based on the actors bios.
Belanna 5'5"
Doctor 5'10"
Chakotay 6'
Janeway 5'5"
Paris 6'1"
Kim 5'11"
Neelix 5'6"
Tuvok 6'
7of9 5'8"
since Jonathan Frakes height is 6' I believe, I am using FC Rikers for the Tuvok, Chakotay and Paris bases. I'm using Obrien and Bashir for Kim and Doctor, and parts from FC/Nem Crusher/Troi and Dax for Janeway and BElanna. Haven't decided who to use for Neelix yet, but I like the Geordi suggestion. I'm going to be attempting the headsculpts from scratch!
hope this might be of some help!
#29
Posted 22 January 2010 - 08:33 AM
I was thinking of doing the same thing to add to my Genertations Riker Head swap (like yours).
I was also thinking of adding a Picard and Geordi to that roll call...
Generations had an odd mix of uniforms on the cast... some had the old TNG style and others had the VOY style. I think in Generations it was just Riker, Picard, Data & Geordi...
Why yes it is. You can see him here: http://www.trektoy.c...?showtopic=2956
#30
Posted 22 January 2010 - 10:35 AM
I really wish DST would change their minds about Voyager.
#31
Posted 22 January 2010 - 10:58 AM
I know it wont happen but I keep hoping we will see something Voyager related at Toyfair next month.
#32
Posted 22 January 2010 - 11:14 AM
I agree that the eyes may need a little more contrast to make them pop. (eww, popping eyeballs)
I've come across a few good tutorials on google about figure eye painting techniques, but I don't have my bookmarks at work, and am having trouble finding the sites from here.
I cant wait to see what else you come up with for Voyager!
#33
Posted 22 January 2010 - 01:37 PM
#34
Posted 23 January 2010 - 03:28 AM
Check my website, http://tiberiusguy.s..._head_tutorial/ I did a Mego Klingon head to DST scale.
If I used a Playmates head, I have started a Guinan head, but need more moulding material, for each of the missing Voyager/DSN figures, I might be able to shrink some heads.
I could send the Hydrospan cast to someone that might be able to remould (I could do it too, but that is more material), and have it recast into a new head. That person, or someone else could paint them and send them off to everyone that wants one.
Right now I am using Alumilite for the casts, and you might notice the bubbles in the recast. The Hydrospan is not making excessive bubbles, so I need a new casting material (I have heard of Smooth On, but have not been successful in finding it locally) for the final cast. I might be able to acquire this, but I need some funds.
The moulding material has to be done twice, once for the original, once for the reduced (I think I paid $40 for three good moulds). I have the Hydrospan to reduce the heads (I paid 30 dollars for it, good for a bunch of reudctions), I think it can do several casts. If I get a better casting material, I will be able to send out casts of the heads. Otherwise I need to send out the new moulds to someone that can recast and paint the heads. My downfall might be in the painting, especially the eyes!
If someone would like to help me in my endeavour, I would be grateful. Perhaps someone (else) might be interested in doing some body sculpts, as not everyone would be able to customize as much as "we" can.
JMW, or James. Sorry if I hijacked your thread, but it has been inspired by this one.
And the first Need is to have someone "donate" the PM head, as I only have some smaller scale figures. If you lend them to me, I am sure they will be fine; unless the grey head syndrome makes a move! NO Guarantees!
#35
Posted 23 January 2010 - 06:24 AM
I have a list of the characters heights based on the actors bios.
Belanna 5'5"
Doctor 5'10"
Chakotay 6'
Janeway 5'5"
Paris 6'1"
Kim 5'11"
Neelix 5'6"
Tuvok 6'
7of9 5'8"
since Jonathan Frakes height is 6' I believe, I am using FC Rikers for the Tuvok, Chakotay and Paris bases. I'm using Obrien and Bashir for Kim and Doctor, and parts from FC/Nem Crusher/Troi and Dax for Janeway and BElanna. Haven't decided who to use for Neelix yet, but I like the Geordi suggestion. I'm going to be attempting the headsculpts from scratch!
Unfortunately, I think DSTs scale is really messed up. I think these are technically supposed to be 8" scale, which means that an 8" figure should normalize to 6', thus each 1 1/3 inch should scale to a foot. When I put a DS9 Worf next to a DS9 O'Brien, I think the worf scales to tower a close foot over O'Brien! There really should only be a bit under a 1/2 inch difference in the scale from The Dr. to Paris...Though a big part of the discrepancy could be Worf huge head, so maybe it's closer then I think!
#36
Posted 23 January 2010 - 09:24 AM
Check my website, http://tiberiusguy.s..._head_tutorial/ I did a Mego Klingon head to DST scale.
If I used a Playmates head, I have started a Guinan head, but need more moulding material, for each of the missing Voyager/DSN figures, I might be able to shrink some heads.
I could send the Hydrospan cast to someone that might be able to remould (I could do it too, but that is more material), and have it recast into a new head. That person, or someone else could paint them and send them off to everyone that wants one.
Right now I am using Alumilite for the casts, and you might notice the bubbles in the recast. The Hydrospan is not making excessive bubbles, so I need a new casting material (I have heard of Smooth On, but have not been successful in finding it locally) for the final cast. I might be able to acquire this, but I need some funds.
The moulding material has to be done twice, once for the original, once for the reduced (I think I paid $40 for three good moulds). I have the Hydrospan to reduce the heads (I paid 30 dollars for it, good for a bunch of reudctions), I think it can do several casts. If I get a better casting material, I will be able to send out casts of the heads. Otherwise I need to send out the new moulds to someone that can recast and paint the heads. My downfall might be in the painting, especially the eyes!
If someone would like to help me in my endeavour, I would be grateful. Perhaps someone (else) might be interested in doing some body sculpts, as not everyone would be able to customize as much as "we" can.
JMW, or James. Sorry if I hijacked your thread, but it has been inspired by this one.
And the first Need is to have someone "donate" the PM head, as I only have some smaller scale figures. If you lend them to me, I am sure they will be fine; unless the grey head syndrome makes a move! NO Guarantees!
I opened a new thread with this idea here: http://www.trektoy.c...?showtopic=3578
#37
Posted 23 January 2010 - 01:10 PM
#38
Posted 10 October 2010 - 03:11 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users