As seen here, the ship from the front. I added the back edge detail on the wings, with some gloss red and yellow mixed (didn't have any orange handy at the time) till i found as near to the right shade to match the orange Bird on the underside of the hull.
Here as seen from above I used the lines molded into the hull by Playmates Toys as a guide and painted the back edge of the wings and the back edge of the primary hull. I masked off the afte sections of the wings and hull to prevent slop, and what little the was , I carefully scraped off with my Xacto blade. I also took a pencil and filled in the arc of windows on the top of the primary hull, then later redid it with a black gel pen.
Here is a closer shot of the bow of the ship, I colored in the windows.
Here is the aft of the ship, which I also colored the windows.
