QUOTE (Commodore Kor'Tar @ Oct 1 2009, 09:50 AM) <{POST_SNAPBACK}>
Yes, just grab a phillips head screw driver that matches the size of the screws holding the shell of the phaser together underneath and remove them all , once you have it open you'll see that the clip itself is screwed onto the bottom half of the shell from the inside , unscrew that bit and the clip should come right off .
Then put it back together , and put the screws back and you should be all set .
Then put it back together , and put the screws back and you should be all set .
but woldn't that leave a loophole in the shell?