This is pretty impressive. Nice work.
TOS Enterprise bridge scratch build for AA/DST figures
Started by Atlanthia, Dec 09 2013 10:31 PM
25 replies to this topic
#21
Posted 12 December 2013 - 09:46 AM
#22
Posted 24 December 2013 - 06:54 AM
Awesome work!!
#23
Posted 10 January 2014 - 10:04 PM
Awesome work!!
Do have a question though, for Uhura's station how did you make the com and the switches?
#24
Posted 11 January 2014 - 05:47 AM
Hi, Admiral. Great to hear from you! Could you please clarify which switches?'I am happy to share all and any build methods but I just want to make sure I am explaining the right ones :lol
#25
Posted 11 January 2014 - 09:13 AM
Thanks for responding. I am curious how the bank of yellow, gray and white switches were made, and the blue com.
#26
Posted 12 January 2014 - 04:20 PM
The blue com is simply two small sections of evergreen .080 x .250 strip, glued together and then sanded to form a triangle. The ends are then covered with thin styrene sheet to tidy them up and trimmed to shape. then, I cut a 13mm x 8mm rectangle from thin styrene sheet and glue it to the front. but before I glue it on, I cut out the speaker grill. I have moulded this one so I can cast the rest.
the switch bank is simply a strip of thin styrene sheet 15mm x 3mm, with a line of milliput then applied to one side and shaped into the triangular raised half of the switch bank. Again, I moulded it so that I can knock them out by the shed load. If you need any more clarification/pics etc, I will gladly help where I can.
Hope that helps.
the switch bank is simply a strip of thin styrene sheet 15mm x 3mm, with a line of milliput then applied to one side and shaped into the triangular raised half of the switch bank. Again, I moulded it so that I can knock them out by the shed load. If you need any more clarification/pics etc, I will gladly help where I can.
Hope that helps.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users